Home
> Original Invincible BBS
> Topic
Your favorite shelf/display!
Posted by VenomMacbeth
| February 27, 2011 03:08PM |
Do you have a particular shelf in your collection that you like the most? Not necessarily for the figures it contains, but the way they're arranged? Post it here!
Here's mine:
(I apologize for the crappy cell phone pic)
As you can see, there are a plethora of different rob'ts on this shelf, ranging from Dairugger, Macross, Gundam, Xabungle, Orguss, Dorvack, etc.! (I'll note there are a couple of sections here that look rather sparse, notably the top right one with Sasuraiger and the Browning below him. I have some figures on the way that will be placed on these shelves, so I went ahead and made room.)
I like this shelf not only because Convertors (and Gobots, etc.) are one of my favorite toy lines, but because they display so well on this interesting shelf. You can comfortably fit 3 Convertor-sized figures in one square (four if you squeeze them in.)
Anyway, so what's your favorite display in your collection? Do you have a little one on your desk at work? Or perhaps on top of the fridge in your kitchen? Show it off here!
Edited 1 time(s). Last edit at 02/27/2011 03:08PM by VenomMacbeth.
Here's mine:
(I apologize for the crappy cell phone pic)
As you can see, there are a plethora of different rob'ts on this shelf, ranging from Dairugger, Macross, Gundam, Xabungle, Orguss, Dorvack, etc.! (I'll note there are a couple of sections here that look rather sparse, notably the top right one with Sasuraiger and the Browning below him. I have some figures on the way that will be placed on these shelves, so I went ahead and made room.)
I like this shelf not only because Convertors (and Gobots, etc.) are one of my favorite toy lines, but because they display so well on this interesting shelf. You can comfortably fit 3 Convertor-sized figures in one square (four if you squeeze them in.)
Anyway, so what's your favorite display in your collection? Do you have a little one on your desk at work? Or perhaps on top of the fridge in your kitchen? Show it off here!
Edited 1 time(s). Last edit at 02/27/2011 03:08PM by VenomMacbeth.
| February 27, 2011 03:14PM |
Displaying your Kingdam Browning with the bullet sprue and everything. You baller.
Seriously, that's a great set of robots on a cute shelf setup. I always wonder how I'm going to think of nice ways to display my figures once I own a home. The rank and file Detolf cases just don't do it for me... I want long shelves of in-scale figures, artsy rows of Real Head figures single file around the room, and some other cool stuff. I guess sort of the difference between toy shelves and decorative shelves.
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
Seriously, that's a great set of robots on a cute shelf setup. I always wonder how I'm going to think of nice ways to display my figures once I own a home. The rank and file Detolf cases just don't do it for me... I want long shelves of in-scale figures, artsy rows of Real Head figures single file around the room, and some other cool stuff. I guess sort of the difference between toy shelves and decorative shelves.
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
| February 27, 2011 03:33PM |
| February 27, 2011 06:43PM |
OK, I'll play.
Here's my desk.
__________________
MoonBaseTom Season tickets available. Call now.
Edited 1 time(s). Last edit at 02/27/2011 06:44PM by B00.
Here's my desk.
__________________
MoonBaseTom Season tickets available. Call now.
Edited 1 time(s). Last edit at 02/27/2011 06:44PM by B00.
| February 27, 2011 08:00PM |
If we're doing desks I can play... this is what's been staring me down all day while I write my term paper.
[prometheusrisingstudios.tumblr.com]
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
[prometheusrisingstudios.tumblr.com]
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
|
mcfitch (Admin)
|
February 27, 2011 10:34PM |
My favorite shelf:
My desktop/hutchtop:
-Mason
------------------------------------------------------------------------
Matthewalt "I actually kinda LIKE that approach! You know: let's make a TOY. Remember those? Products designed to be played with without breaking? DO YOU REMEMBER, LOVE?!"
My desktop/hutchtop:
-Mason
------------------------------------------------------------------------
Matthewalt "I actually kinda LIKE that approach! You know: let's make a TOY. Remember those? Products designed to be played with without breaking? DO YOU REMEMBER, LOVE?!"
| February 27, 2011 11:13PM |
|
Erik Sjoen (Admin)
|
February 27, 2011 11:55PM |
VenomMacbeth Wrote:
-------------------------------------------------------
> Do you have a particular shelf in your collection
> that you like the most? Not necessarily for the
> figures it contains, but the way they're arranged?
> Post it here!
>
> Here's mine:
>
> [toyboxdx.com]
>
> (I apologize for the crappy cell phone pic)
>
OK. I admit that I lent my cell to this guy for the pic. As if you couldn't tell....
-------------------------------------------------------
> Do you have a particular shelf in your collection
> that you like the most? Not necessarily for the
> figures it contains, but the way they're arranged?
> Post it here!
>
> Here's mine:
>
> [toyboxdx.com]
>
> (I apologize for the crappy cell phone pic)
>
OK. I admit that I lent my cell to this guy for the pic. As if you couldn't tell....
|
Erik Sjoen (Admin)
|
February 27, 2011 11:59PM |
|
Erik Sjoen (Admin)
|
February 28, 2011 12:06AM |
| February 28, 2011 12:14AM |
That Gordian trio is great. I love how their toys always have the weirdest propotions... the Godaikin is tall and skinny, but for some reason a lot of other figures like those sofu an the Jumbo are strangely wide to capture all the shoulder mecha detail.
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
Introducing Prometheus Rising Studio.
[prometheusrising.net]
I make 3D printed mecha action figures.
| February 28, 2011 02:59AM |
here is my favorite shelf..
all of them actually :-)
[toyboxdx.com]
JOHN
Edited 1 time(s). Last edit at 02/28/2011 11:50AM by johnparas11.
all of them actually :-)
[toyboxdx.com]
JOHN
Edited 1 time(s). Last edit at 02/28/2011 11:50AM by johnparas11.
|
Erik Sjoen (Admin)
|
February 28, 2011 12:54PM |
Prometheum5 Wrote:
-------------------------------------------------------
> That Gordian trio is great. I love how their toys
> always have the weirdest propotions... the
> Godaikin is tall and skinny, but for some reason a
> lot of other figures like those sofu an the Jumbo
> are strangely wide to capture all the shoulder
> mecha detail.
You mean sofubi? Sofu is just "soft"..
-------------------------------------------------------
> That Gordian trio is great. I love how their toys
> always have the weirdest propotions... the
> Godaikin is tall and skinny, but for some reason a
> lot of other figures like those sofu an the Jumbo
> are strangely wide to capture all the shoulder
> mecha detail.
You mean sofubi? Sofu is just "soft"..
|
Erik Sjoen (Admin)
|
February 28, 2011 12:55PM |
|
Sanjeev (Admin)
|
February 28, 2011 04:38PM |
| February 28, 2011 06:22PM |
I really miss having the room to display jumbos and other big stuff:
Best, Ken-A
Best, Ken-A
| March 01, 2011 09:26PM |
| March 01, 2011 10:29PM |
| March 01, 2011 11:11PM |
| March 02, 2011 10:31PM |
| March 03, 2011 12:42AM |
| March 05, 2011 01:42AM |
| March 05, 2011 08:38AM |
Yeah, cohiba it's not a great toy at all - it's sort of ugly and impossible to display, but it's got charm and naivete and if you are going to go after all the Raideen toys you sort of need it.
I'm kind of scraping the bottom of the barrel with Raideen toys now - The only rare vintage things I need are the mutropolis base (which will likely never happen) and the Robin tricycle. Otherwise its bootlegs, gashapon etc... until something unknown comes up. There's also a few variations to that flosr, a marmit stone head base for their flexible joint models etc... I could also go after the vintage kits but those would just be for the art as I would probably never build them.
I'm kind of scraping the bottom of the barrel with Raideen toys now - The only rare vintage things I need are the mutropolis base (which will likely never happen) and the Robin tricycle. Otherwise its bootlegs, gashapon etc... until something unknown comes up. There's also a few variations to that flosr, a marmit stone head base for their flexible joint models etc... I could also go after the vintage kits but those would just be for the art as I would probably never build them.
| March 05, 2011 08:59AM |
Venom, I have one of those tic-tac-toe shelves, too:
Where did you get it? I always have people asking me where I got mine but it was given to me and the people who gave it to me couldn't remember where it came from.
Edited 1 time(s). Last edit at 03/05/2011 09:00AM by Roger.
Where did you get it? I always have people asking me where I got mine but it was given to me and the people who gave it to me couldn't remember where it came from.
Edited 1 time(s). Last edit at 03/05/2011 09:00AM by Roger.
|
Sanjeev (Admin)
|
March 05, 2011 08:02PM |
Just got organized with this today...
I've never been particularly good with displaying my toys (with the possible exception of the glowies)...but this one genuinely makes me smile!
I recently got a Y!J haul with some Toho Bullmarks I've been trying to nab for a bit. Including the mighty Megalon!!
There's a shelf right at the top of my stairs that are pretty much PERFECT for these guys. Now, can you spot the impostors?
The original plan was to put all my Toho Bullmarks up there, along with non-Bullmark (but classic style) vinyls to complete the Toho pantheon. Amapro/Marusan King Shisa, M1 Titanosaurus, M1 Manda, Marmit Frankenstein, M1 Gaira and Sanda, and maybe a couple others.
But as you can see, I'm pretty much outta room already!
I've never been particularly good with displaying my toys (with the possible exception of the glowies)...but this one genuinely makes me smile!
I recently got a Y!J haul with some Toho Bullmarks I've been trying to nab for a bit. Including the mighty Megalon!!
There's a shelf right at the top of my stairs that are pretty much PERFECT for these guys. Now, can you spot the impostors?
The original plan was to put all my Toho Bullmarks up there, along with non-Bullmark (but classic style) vinyls to complete the Toho pantheon. Amapro/Marusan King Shisa, M1 Titanosaurus, M1 Manda, Marmit Frankenstein, M1 Gaira and Sanda, and maybe a couple others.
But as you can see, I'm pretty much outta room already!
| March 05, 2011 09:53PM |
|
josh fraser (Moderator)
|
March 06, 2011 08:30AM |
|
Sanjeev (Admin)
|
March 06, 2011 09:31AM |
|
Sanjeev (Admin)
|
March 06, 2011 09:47AM |
| March 06, 2011 11:50AM |
I like how you've recreated the flying Mothra. Most folks would go the cheap route, and run string from the ceiling, but you've got a $30 aluminum flashlight tower to hold him up! The fact it's an bright red one fits pretty good with the Japanese toys.
...joking, joking...great shelf, and I always come up wrong if I guess on which is real, so, nuh-uh.
...joking, joking...great shelf, and I always come up wrong if I guess on which is real, so, nuh-uh.
|
Sanjeev (Admin)
|
March 06, 2011 12:06PM |
|
mcfitch (Admin)
|
March 06, 2011 04:00PM |
| March 29, 2011 06:53PM |
A little late to the party, but I got 2 favorites of mine.
Some of my Voltrons - my jumbo Toynami wont fit here :(
and some of my Daitarns and friends, plus some animation cels
Some of my Voltrons - my jumbo Toynami wont fit here :(
and some of my Daitarns and friends, plus some animation cels
| March 30, 2011 02:25AM |
| April 05, 2011 03:27AM |
@Roger: Mine was given to me as well...so I'm not sure where they come from either. ><
This shelf is quickly becoming one of my favs...
Also, I've updated this'n
Calypso is all by himself there on the left, because I've got a Rex on the way.
Edited 1 time(s). Last edit at 04/05/2011 04:18AM by VenomMacbeth.
This shelf is quickly becoming one of my favs...
Also, I've updated this'n
Calypso is all by himself there on the left, because I've got a Rex on the way.
Edited 1 time(s). Last edit at 04/05/2011 04:18AM by VenomMacbeth.
| April 06, 2011 06:35PM |
| April 07, 2011 12:05PM |
Heads up -- if your local Borders is closing, they may have some cheap fixtures that can make good displays. I found this acrylic riser for $2.20 yesterday (sorry about the dark pic):
They've also got innumerable shelves, stands, etc.
Best, Ken A.
They've also got innumerable shelves, stands, etc.
Best, Ken A.
| April 09, 2011 04:25PM |
Sorry, only registered users may post in this forum.

